Klein® D2000-9ST 2000 Heavy Duty Rebar Work Cutting Plier, 9-3/8 in OAL
Stanley® FatMax® 33-716 Reinforced Tape Rule with BladeArmor®, 16 ft L x 1-1/4 in W Blade, Mylar® Polyester Film Blade
Channellock® 426 Tongue and Groove Plier, 7/8 in Nominal, 3/4 in L C1080 High Carbon Steel Straight Jaw, 6-1/2 in OAL
Estwing® E324S Framing Hammer, 16 in OAL, Smooth Surface, 24 oz Steel Head, Straight Claw, Steel Handle
Mayhew™ 62065 X-Long Pin Punch Kit, Hex Shank, 9-1/2 in OAL, 5 Pcs
DeWALT® Power-Stud®+ Powers® 7449SD1-PWR Expansion Wedge Anchor, 3/4 in dia, 10 in OAL, 7-1/2 in L Thread, Carbon Steel, Zinc Plated
BBI® 777037 All Threaded Rod, 3/8-16, 12 ft OAL, Steel Alloy
Campbell® T3899724 Hitch Pin, 1/2 in dia, 4-1/4 in L Usable, Forged Steel, Zinc Plated with Yellow Chromate, 5 Grade
Primesource® 8CTDSKR Sinker Nail, 17/64 in, 2-3/8 in L, 9 ga, Vinyl Coated, Smooth Shank
BBI® 754072 Medium Split Lock Washer, 1/2 in Nominal, 18-8 SS
Arizona Cardinals Stadium - Lifting Fabric Panels
- By Hanes Supply
- Dec 20, 2005
Hanes Supply furnished the following Rigging and Lifting for Fabric Panels at the New Arizona Cardinals Stadium: Due to the capacity of the helicopter, Hanes Supply provided a 3,000 pound capacity by twenty foot Aluminum Beam. The weight of the Spreader Beam was 250 pounds. The Spreader Beam was fabricated in less than one week by Engineered Lifting Technologies, Inc. In addition, the Spreader Beam took its first flight in the air from Buffalo, New York to Phoenix, Arizona via airfreight. This was due to the tight construction jobsite schedule.