Dixon® 16P2 Holedall® Uni-Range External Swage Coupling, 1 in ID x 1-34/64 to 1-38/64 in OD Nominal, MNPT End Style, Carbon Steel, Domestic

Manufacturer #16P2

In stock

Be the first to review this product

List Price: $29.67

$29.67

Quantity Break Pricing may apply in the cart

HSI

16P2-10639

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Product Overview

Dixon® External Swage Coupling, Uni-Range, Series: Holedall®, Fitting/Connector Type: Coupling, 1 in ID x 1-34/64 to 1-38/64 in OD Nominal, MNPT, 4-9/16 in Length, Carbon Steel, Plated, Domestic

Features

Designed for smaller hose systems
Shipped complete with factory assembled stem and ferrule combination
Can be swaged or crimped
Stainless steel stem lengths are investment cast
Other hose OD's available, contact Dixon
Dixon holedall stems and ferrules are specifically designed to be used together as a coupling system
Due to differences in dimensions and tolerances, for safety reasons, do not use other manufacturer's stems or ferrules with Dixon holedall products
Do not use a wrench or vice on ferrule
Holedall couplings, regardless of coupling style, are never to be used for steam service at any pressure
Holedall fittings are not to be used with cable reinforced high pressure hose, 4 or 6 braid wire hydraulic hose or any other service not listed in the recommendations
Externally swaged holedall couplings, to perform satisfactorily, must be applied properly in accordance with Dixon's assembly procedures, using correct die and ferrule for that particular hose end OD
Dixon's die and ferrule Recommendation guide is to be used to select correct dies and ferrules
Hose service working pressure (including surges and spikes) is never to exceed the maximum recommended working pressure for the fitting
The assembly's (hose + coupling) maximum working pressure is the lesser of the hose rated working pressure or the coupling rated working pressure
Media being transported through the hose should be compatible with the stem material
Compatibility of ferrule material with the environment in which it will be used is recommended
For applications other than the ones list, please consult Dixon
For use on most one or two wire braid reinforced hoses, fiber reinforced (braided or spiral) with or without helical wire such as chemical, high pressure air and water hoses and lp gas hoses

Specifications

More Information
Manufacturer Part Number	16P2
Manufacturer	Dixon Valve & Coupling
Brand Name	DIXON
Length (in)	4.562
Type	Uni-Range
Warnings	This product contains a chemical known to the State of California to cause birth defects or other reproductive harm Do not use in connection with drinking water Wash hands after handling
Finish	Plated
Domestic/Import	Domestic
Fitting/Connector Type	Coupling
Material	Carbon Steel
Outside Diameter	1-34/64 to 1-38/64 in
Inside Diameter	1 in
Package Quantity	1/Each

Reviews

Write Your Own Review